Michigan Sportsman Forum banner

X67 Graph problem

471 Views 5 Replies 3 Participants Last post by  Blue
This year when using my X67 and set the lower range limit, it jumps to a lower setting. For example, if I'm in 12' of water and want to set the lower limit to 15' it accepts it, but in a minute or so, it might, on its own drop to 30' and then a short time later will jump back to 15'. It continues to do this flipping back and forth. Aggravating. When using it last year I had no issue. Just something that happens this year.
1 - 6 of 6 Posts
Meant to ask, does anyone else experience this or have a possible solution. Thanks
Take it off 'auto depth' mode. See if that fixes it.
I've notice sometimes when im fishing over a softer bottom you will need to set the lower limit down more. Try 5'. Harder bottoms I can set the lower limit 1' below bottom.
Also make sure "manual chart mode" is checked
  • Like
Reactions: garyrodbender
Thanks guys!! I try your suggestions out next time out. Appreciate the input
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top