Michigan Sportsman Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,304 Posts
yep tighten the limb locking bolts down, they should not be loose when shooting and in my experience will make the bow louder. Like stated above they only need to be loosened when adjusting draw weight or pressing the bow.

Also go over all the bolts/screws on the bow and any accesory. You would be amazed at how some bolts/screws can vibrate loose. I use blue lock tite on all mounting bolts and adjustment bolts/screws on accesories.

One area that I found on my 06 tribute that caused noise was the shrink wrap on the draw stop. It was loose on the stop and made a buzzing noise when shot. I took the stop off and re-shrunk the tubing and no more noise.

Hope this helps,

J-
 
1 - 1 of 1 Posts
Top