85 GMC high serria 1500 series.
lowered 3-4
tonneu cover
2 inch cowl induction hood
custom billit grill by stull
new front and rear(2 years old) bumper
new 3.73 limited slip rearend
all new u-joints
turbo-350 c converted to regular turbo 350, rebuilt very strong. Hardened sprag etc.
new 2500 stall converter
goodwrench 350 crate shortblock
1968 327 chevy heads ported and polished, stainless manley proflows in 194-150s , 9-6to1 comp
1094 steelshim head gasket in .015
the pistons are stock 12cc reverse dome 4 valve relief
268 XE hydrolic comp cam
high tech lifters and timing chain set from comp cams
magnum roller tip rockers from comp cams
hardened push rods , with guide plates
rpm intake , 750 3310 holly
rebuilt hei with flame thrower ignition
accel wires
new 3 core radiater
trans cooler
fan and serpintine belt setup
when I did the head swap , I pulled the motor I basically rebuilt the lower end. It didnt need it(15000miles) , but my dad always told me , if you gat it apart replace everything while its open.
The piant is a custom darkbrown mattalic nd is 3 years old , it looks awesome. The truck was torn down and taken to bare metal.
Yhe wheels are series 55 engles , aluminums with 205 70 on front, 325 50 15 dragradials on rear , or 275 60 15s.
Went to Milan before the 373s , and 750,(had a 625 roaddemon on), (3.42), and ran a 14.43 at 96 mph
Its fun and I love it, but its must go.
theres more but kinda depressed right now .
lowered 3-4
tonneu cover
2 inch cowl induction hood
custom billit grill by stull
new front and rear(2 years old) bumper
new 3.73 limited slip rearend
all new u-joints
turbo-350 c converted to regular turbo 350, rebuilt very strong. Hardened sprag etc.
new 2500 stall converter
goodwrench 350 crate shortblock
1968 327 chevy heads ported and polished, stainless manley proflows in 194-150s , 9-6to1 comp
1094 steelshim head gasket in .015
the pistons are stock 12cc reverse dome 4 valve relief
268 XE hydrolic comp cam
high tech lifters and timing chain set from comp cams
magnum roller tip rockers from comp cams
hardened push rods , with guide plates
rpm intake , 750 3310 holly
rebuilt hei with flame thrower ignition
accel wires
new 3 core radiater
trans cooler
fan and serpintine belt setup
when I did the head swap , I pulled the motor I basically rebuilt the lower end. It didnt need it(15000miles) , but my dad always told me , if you gat it apart replace everything while its open.
The piant is a custom darkbrown mattalic nd is 3 years old , it looks awesome. The truck was torn down and taken to bare metal.
Yhe wheels are series 55 engles , aluminums with 205 70 on front, 325 50 15 dragradials on rear , or 275 60 15s.
Went to Milan before the 373s , and 750,(had a 625 roaddemon on), (3.42), and ran a 14.43 at 96 mph
Its fun and I love it, but its must go.
theres more but kinda depressed right now .
