Trim motor

Discussion in 'Boating and Boat Rigging' started by JUSTCATCHINUM, Nov 19, 2020.

  1. JUSTCATCHINUM

    JUSTCATCHINUM

    Messages:
    673
    Likes Received:
    623
    Location:
    Sterling Heights & Au Gres, Mi.
    I have a 2007 90hp E-Tec. The trim motor shaft seal is leaking. Does anyone know where to get it rebuilt in SE Michigan. I can take it off and reinstall it.

    Thanks
     
  2. ro2

    ro2

    Messages:
    255
    Likes Received:
    107
    If you mean the piston shaft seal, its not a difficult job as long as you can get the cap off and get new seal may as well replace cap seal while ur at it
     

  3. JUSTCATCHINUM

    JUSTCATCHINUM

    Messages:
    673
    Likes Received:
    623
    Location:
    Sterling Heights & Au Gres, Mi.
    After the cap is unscrewed the entire shaft and piston assembly needs to be un-assembled to get to the cap shaft seal. The seal rebuild kit is about $130 and the special tool are about $150. I'm sure I could do it as I've rebuilt a fair number of Fox nitrogen charged snowmobile shocks. But would rather hire it out
     
  4. Mark Clifford

    Mark Clifford

    Messages:
    27
    Likes Received:
    16
    Try Great Lakes Skipper online. I always check Amazon.
     
  5. waldowillie

    waldowillie

    Messages:
    47
    Likes Received:
    34
    Location:
    Oakland County
    Call and talk to Dave at Lockemans Hardware & Boats in Detroit