Jig Molds

[Gardenfly]

Does anyone know of a place that will modify DO-IT jig molds? Or can recomend another company that makes jig molds? What my problem is the DO-It company doesnt make a round ball jig mold that will fit 3/0-4/0 hooks in a 1/8 ounce and 1/16 ounce round ball jig style.
Mike:confused:

[jaid]

DO-IT makes a round head mold that accepts up to 3/0 hooks and weight sizes of 1/32, 1/16, 1/8, 1/4, 5/16, 3/8, 1/2. (RHB-7-A)

They also make a 'socket eye' (round head with indentions for 3d eyes and/or sticker eyes) that accepts up to 4/0 hooks and weight sizes of 1/8, 1/4, 5/16, 3/8, 1/2, 5/8. (RSE-6-A)

Im not sure youll be able to find a mold that accepts a 4/0 hook with 1/16th weight.

http://www.staminainc.com carries quite a few of the molds. Both of the two mentioned above are in the walleye section (http://www.staminainc.com/jigmolds/jigmolds_walleyejigs.html) of their jig molds page.

[motornutz]

you could make a jig mold out of plaster of paris. thats what i used o use for my laker jigs

[Gardenfly]

Thanks for the information and killer website. The problem I have been having is the 3/0 hook only works in the 3/8 and 1/2 part of the mold. The shank of the hook is a little to long for the 1/8 and 1/16 part of the molds. I am going to look and see if its the same mold i have. Hopefully it isnt.. Thanks again.
Mike:cool: