cameras

[dburroak]

went up and baited for the first time this past weekend. found some really good spots and one bait was getting ripped up bad everyday. we had a camera out and got pictures of me baiting - the site before anything hit - and after it was hit. whats up? anyone got any tips? the camera is a wildview and we`ve got it set about 35ft away. we had it set for 2 bursts with the flash set to on. what are we doing wrong?

[Wiggler]

i have one of those too im learning. one day i get great pictures, the next time i get almost nothing. im still playin with mine, so if you figure yours out let me know.. :confused:

[upmounty]

possibly too far war or is set too high for the bear. it will trigger you but not the bear so it might be to high

[TJHUNTER]

i set mine up pretty close and low 15 to 20 feet. im getting lots of coons and squirrls

[engin_eddie]

i set mine up pretty close and low 15 to 20 feet. im getting lots of coons and squirrls

I notice the same thing. I checked it after a weekend and it has over 300 pics on it! Lots of squirrels, coons, etc. I also notice I got a lot of what appeared to be nothing. I have the basic Wildview that as far as I know can only do 3 shot bursts? Makes for a lot of pics. I got quite a few that would simply say data corrupt or something though.

[skullman]

I own 3 of them and find that 20 feet is the max distance.

Denis

[swampbuck]

We have been having the same problem. Yesterday we were told that if your using to big of an sd card it can cause problems. Apparently the guy goes online to find 260-500mb chips because its tough to find them in stores and the gb chips cause the camera not to work correctly. I am going to check it out.

Any ideas how to get rid of the 3 shot burst......its a waste of batterys. We busted the flash bulbs, that helped some. But they still eat batterys.