PDA

View Full Version : cheap deer feeder



automan4025
11-11-2007, 11:44 AM
Can anyone tell me how to make a cheap pvc deer feeder. Or send me a pic of one.



wally-eye
11-11-2007, 11:50 AM
Not legal anymore in Michigan. Only legal one's are the ones that spin out feed in "at least" a 10 foot area.....................sorry....
automan4025
11-11-2007, 12:03 PM
Not legal anymore in Michigan. Only legal one's are the ones that spin out feed in "at least" a 10 foot area.....................sorry....
Well if there not legal I quess I don't need one
Thank you
Mich. Buck Wacker
11-11-2007, 12:45 PM
Go get yourself a spincast motor at Cabelas or Bass Pro, I think Dunhams might even have them, then attach it to the bottom of a 5 gallon bucket and hang it in a tree and theres your feeder!:)
Bushbow
11-11-2007, 02:49 PM
Take a 4-5' 6" piece of PVC. Put a cleanout on the bottom (A T that comes out on an angle) angle it up. Put a cap on the bottom that drains. Fill with corn and cap the top. There ya go.
I am not advocating ilegal feeding - Just answering the original question.

Bob Urban
homerdog
11-11-2007, 03:04 PM
Take a 4-5' 6" piece of PVC. Put a cleanout on the bottom (A T that comes out on an angle) angle it up. Put a cap on the bottom that drains. Fill with corn and cap the top. There ya go.
I am not advocating ilegal feeding - Just answering the original question.

Bob Urban

You could always spread some of the feed around whenever you go out to check on it or fill it. Not sure if that would satisfy a CO though.
stickem
11-11-2007, 05:26 PM
pvc feeders are fun!!!!
wally-eye
11-11-2007, 05:59 PM
pvc feeders are fun!!!!

and illegal to use for baiting in Michigan.....
uglystick
11-11-2007, 07:38 PM
what about recreational feeding:idea:
stillwaiting
11-11-2007, 09:59 PM
if you can find a pickle barrel, cut out bottom and attached to tree on a platform, at any height you want, and then attach PCV tubing and you have a gravity feeder. But after bear destroys it, get a 55 gallon drum, weld three legs to the sides, cut hole in bottom and metal piping to bottom. good gravity feeder, bear won't destroy. cost: $85.00
wally-eye
11-11-2007, 10:03 PM
what about recreational feeding:idea:

Still illegal even for recreational feeding/viewing..........sorry....