sharpen or replace

[dinoci22]

I shoot 100 grain four blade muzzys and I love them. I am in need of some new blades but all I can find are replacements for the four blade 100 grain glue on/90 grain screw on heads, mine are screw on 100s. I have checked the big box stores but haven't had time to swing over to the local proshop. I have a handheld sharpener that is supposed to sharpen knives and broadheads. It has broadhead wrenches in the handle. Has anyone ever used this type of sharpener with any success or should I continue my quest for new blades. Thanks.

[Chad (Walleydog Chaser)]

I also shoot the older 4 blade, 100 gr. muzzys (not the MX-4). I had the same problem and bought the exact replacements that you have seen. They fit the older 4 blade 100 gr. fine. A couple of years ago, they packaged their 4 blade, 100 gr. replacement blades seperate but I think that when Muzzy expanded their offering, that they tried to consolidate some of their blades/packaging. They still seem to fit fine though.

I have tried to sharpen the muzzy blades and with the Trocar tip, you can't get the right angle on the blade.

[dinoci22]

Chad

The blades that say they are for the 90 grain screw in and 100 grain glue on heads appear to have a hole in the center of the blade that the 100-grains as originally packaged do not. Have you noticed any difference in the fleight of these heads as compared to you original 100s.

Thanks for the reply.

[QuakrTrakr]

Buy them online. It'll save you alot of gas driving around.
http://www.cabelas.com/cabelas/en/templates/pod/standard-pod-wrapped.jsp?id=0004591&navCount=2&parentId=cat20059&masterpathid=&navAction=push&cmCat=MainCatcat21424-cat600295-cat20059&parentType=index&indexId=cat20059&rid=

[Michihunter]

REMOVE the blades and use a vise to clamp and use your accusharp.;)