PDA

View Full Version : prop guards




hunting with chuba
08-16-2007, 07:19 AM
i know talon has been bombarded with pm.s, and he has been nice enough to forward them to me, so if you need a prop guard for your kicker motor you can pm me ,on the net they cost 135.00 + shipping, i sell them for 50.00 let me know what type motor you have and any other info you need thanks




Slick fishing
08-16-2007, 08:15 AM
I will see you next week and thanks.. Cya Slick

huntingmaniac45
08-16-2007, 11:54 AM
Wow..............now thats a good deal.

doublell
08-17-2007, 02:06 PM
PM sent

rjt
08-17-2007, 02:31 PM
See you on Sunday or Monday, which ever works best for you!

hunting with chuba
08-18-2007, 11:39 AM
thanks to all, i have returned all pm,s and i only have a few of these left so if you need one pm me cause once there gone you will have to buy direct from the factory thanks

MiketheElder
08-18-2007, 03:12 PM
I didn't get an answer to my PM. Do you still have any left?

hunting with chuba
08-18-2007, 09:01 PM
thought i sent you a pm this morn. i will send now sorry

Slick fishing
08-22-2007, 12:21 AM
Important info you need to know so you will know if it will fit your aplication, mine wont fit because my mesurment from cavitation plate to center shaft of prop is 3 3/4 so if any one has not got theres and needs one let me know because it will be easier than sending it back to hunting with chubba $57.00 total and thats with shipping and paypal works for me just PM if interested.. Cya Slick

http://i167.photobucket.com/albums/u148/Slick13photos/prop.jpg

hunting with chuba
08-22-2007, 05:53 AM
pm,ed ya slick

Slick fishing
08-22-2007, 12:52 PM
bump

sfw1960
08-22-2007, 01:09 PM
Hey Brent - I think Shametamer may be lookin' for one....
WHEN isn't that guy lookin' for boat stuff??
RAS

Slick fishing
08-23-2007, 12:34 AM
Thanks Rob I will Pm him.. Cya Slick

thad
08-24-2007, 02:57 PM
Prop Guard seems like a good device for your main motor, but I understand it can't be used if your boat exceeds 35mph.

hunting with chuba
08-24-2007, 03:35 PM
these work great when you have a kicker motor mounted off to the side from your main motor when you hand line. What happens is 2 guys sitting next to each other near the back of the boat hand lining controlling the kicker and when you turn the boat the guy closet to the kicker always has to make sure his line does not go under and get tangled in the prop, causing loss of gear or worse yet someone calling you lefty since you loss a finger or 2. Check them out at www.propguardmarine.com and you can see by the design its almost impossible to get you line caught in the prop, i only have a couple left and when there gone there gone, thanks

thad
08-24-2007, 05:04 PM
I wanted to put it on a 90hsp Force, But what you saying they are basicly made for kickers. Thanks for the reply. A new member. Posted a Hello, but was not posted.

hunting with chuba
09-04-2007, 05:41 AM
i have only a couple of these left so if you need one get a hold of me once there gone ,thanks

hunting with chuba
03-12-2008, 09:17 AM
i have 2 left let me know if anyone needs one 50.00 work great thanks

rjt
03-12-2008, 09:22 AM
I purchased one last year, they do work great. Awesome deal for $50!!