PDA

View Full Version : lure holdres



No.4shot
06-04-2007, 06:02 PM
I was watching the flw tour on t.v. this past weekend and I saw the guy lift the door to his rod locker and there was a metal clip that held a slew of lures. Does anyone know whta these are called and where I could find some at?



No.4shot
06-06-2007, 03:17 PM
anybody?
Ugly Stick
06-06-2007, 04:47 PM
There isnt much out there that Cabelas doesnt have.
captain jay
06-06-2007, 07:54 PM
First, a lot of those guys have been doing things long enough that it could be something homemade that fits their boat and style of fishing.

Second, if you can remember the name of the fisherman, I can probably find out for you.

Captain Jay
Capnhook
06-06-2007, 08:18 PM
NO.4shot, I saw that guy too. He was hawking that item as a lure orginizer, and it fit under the edge of his side lockers. He is on the FLW show on Sundays. Good Luck on finding it. Capnhook
Ninja
06-06-2007, 10:32 PM
I was watching the flw tour on t.v. this past weekend and I saw the guy lift the door to his rod locker and there was a metal clip that held a slew of lures. Does anyone know whta these are called and where I could find some at?


Cook's Tackle Storage....try KD Outdoors in Waterford!!! :D
captain jay
06-06-2007, 10:47 PM
Ken,

If you have these, maybe you could answer a few questions for me. Can they be used on storage doors that are upright, and open by pulling them down toward you? All the pics I saw they were being used on doors that close flat on the floor, not in side storage. Also, will they hold cranke like stickbaits, Tots and warts?

Thanks for any info you might have.

Captain Jay
chrisu
06-07-2007, 12:53 AM
For my existing tackle box, I use some old toilet paper/paper towel cardboard tubes, I cut them dow to length (a fuzz longer that the baits), then cut a small slitin the end for one hook to slide/secure into. If the cardboard wears out, no problem...a little time in the office gives me a new supply!
No.4shot
06-07-2007, 03:45 PM
Cook's Tackle Storage....try KD Outdoors in Waterford!!! :D


I did a web search and found the Cooks system, but they say that it can only hold spinnerbaits and plastics bags. the guy on FLW had crankbaits on there. That is what I need. It seems like the the plastic containers don't hold that many of them so I am looking for some alternatives.