Blazer vanes offset?

[gills]

Am thinking about trying Blazer vanes. Do you offset them at all or just straight fletch?

[CMR]

After a few tries, I put them on with a right helical.

[Huntmaster143]

I'm with CMR, I put mine on with a right helical with short wraps.

[jjc155]

same as above, cept left helical and short wraps.

J-

[glockman55]

Off set works too, I've did it both ways. With the short Blazers, the helical is just about the same as the off set, not much twist. Good Luck.

[TnRidge]

Off set works too, I've did it both ways. With the short Blazers, the helical is just about the same as the off set, not much twist. Good Luck.

Ditto , the short 2" vane dosn't get much helical twist because it doesn't span much length on the helical clamp .
I put a good degree of offset on them . I just lay the dry fletch in the clamp to set the offset enough so it still maintains full contact with the shaft .