PDA

View Full Version : No spark




tdejong302
05-21-2007, 09:45 AM
40 hp evinrude has no spark. Checked kill switch and wires to make sure not shorted out. Checked key. Replaced coil. Replaced Plugs, Checked rayo (no points). Still no darn spark.

Ordered a power pack. Any other suggestions. Thanks. :mad: Motor is a 1992.




bigcountrysg
05-21-2007, 10:28 AM
did you check the ground for the ignition system. Bad ground or no ground causes no spark situation.

Raymond S.
05-21-2007, 12:18 PM
Check to make sure you have the battery hooked up correctly. If you switch the +/- it will crank but won't spark. Just a thought.

tdejong302
05-21-2007, 11:35 PM
Thanks will check both in the a.m. Appreciate the help.

tdejong302
05-22-2007, 11:13 PM
After alot of testing and talking to maint. guys we first tried the coil. No luck. Hated spending more $$$$$$$$$$$$$$ on parts that may or not be the problem. So called local evinrude dealer. He ran us thru what we already did and he said 100% sure its the power pack. So more $$$$ invested and guess what. It was the power pack. I could hug that darn thing. It was a real pain tracing this problem.

He said they always start with the power pack when testing fails to show a short. Good luck on your repairs.