Help

[quest32a]

Tonite I tried to take my Raven Eclipse apart for a little matinence. Just some minor cleaning up, there was some dirt I could hear on the inside and I felt like washing some of the spawn out that I know had accumulated in there over the past 5 months.

I took the 3 screws off the cover, and then took the screw in the middle out. (which on the eclipse is also the adjustable tension screw) Now I should be able to pull the reel apart, right? Wrong, I have checked that thing over from top to bottom and cannot for the life of me get it apart.

I also took the back screws out for the clicker, so putting my pin back together is out of the question. I have to get it apart so I can put my clicker back together...LOL

Any advice on getting it apart? Or am I missing something completely....

Thanks!

I posted this on another site as well and got some advice, and have since emailed the company. I would like to get this taken care of w/o shipping it out if possible. If anyone has any feasablie ideas or has been through this before let me know... Thanks

[MPsteelheader]

pb blaster might work john

[gomer]

pb blaster might work john

Hey Mark, is that along the same lines as pb and gomer?:lol: :lol: :lol:


Sorry John, haven't taken an eclipse appart so I can't help ya there...

[AKFLY]

Call Craig at erie outfitters www.erieoutfitters.com

or get in touch with the distributor in Canada
http://www.anglersinternational.com/

[Alpha Buck]

Hey John, not sure if you got that fixed or not but here is the number I would call. 519-620-8566 Bridget should be able to help you.

[quest32a]

Thanks guys, I got it all squared away. I had to leave the top cover on and the center screw in and draw it out by removing that center screw. I had no idea,

Thanks again for the help.